Wave Curtains Installation in Bluewater Residences, Dubai Marina
The Brief
The living room opens onto a balcony through a single sliding door, almost the full width of the wall, facing straight out toward the Marina. It's the best view in the apartment, and also the biggest problem. By early afternoon the sun sits directly on the sofa and the TV screen, and the room gets warm enough that the air conditioning struggles to keep up until evening.
The owners often host, so they wanted a curtain that could close the whole wall in one smooth pull, without a manual cord getting tangled or catching on the sofa arm every time. They also didn't want the room to feel closed off during the day, just shaded.
| Attribute | Detail |
|---|---|
| Location | Bluewater Residences, Bluewater Island, Dubai Marina |
| Property | Residential apartment | Room covered | Living room (balcony sliding door) |
| Work | Motorized wave curtain supply, fitting and testing |
| Time on site | 1 day |
What We Fitted
We fitted a motorized wave curtain across the full width of the sliding door, running on a single powered track. The fabric is a charcoal thermal-lined blackout with a slight sheen, chosen so it reads as a solid dark panel against the glass rather than a flat matte block. It's backed with a light oatmeal sheer on the same track, so the room can be dimmed without shutting it completely.
The wave heading was the right call here because of the width. A wave fold moves as one continuous S-shaped ripple when it opens and closes, and across a wall this wide, a pinch pleat or eyelet would have bunched unevenly at the stack. Wave fold stays even the entire way, which also matters for a motor, since the track pulls the fabric at a steady pace and any stiff pleat would drag.
How the Work Was Done
We started with a site visit to measure the full width of the sliding door and check the ceiling above it, since a motorized track needs a solid, level fixing point and access to a nearby power point. The team also tested the switch position the owners wanted, at hip height beside the door, before confirming the wiring route.
Fabric Selection
Fabric was chosen on site, holding the charcoal against the sofa upholstery and the oatmeal sheer against the wall paint in the actual afternoon light, since colors read differently under sun than under a showroom bulb. Once confirmed, the workshop cut, lined and finished both curtains to the full width, sewing the wave heading tape along the top so the folds set correctly once hung.
Installation Process
On installation day, the powered track went up first, screwed into the ceiling at multiple points to carry the extra weight of the motor, then wired into the nearest point and tested empty before any fabric went on. The sheer was hung first, then the charcoal blackout on the front rail. The team ran the motor back and forth more than a dozen times, checking the stack folded evenly at both ends and that the chain didn't catch. One bracket needed re-tightening after the first few runs. The wall switch was fitted last, tested, and the remote paired before the team packed up.
The Result
The living room now closes with one press of a switch. Closed, the room drops several degrees cooler within the hour and the TV is watchable at any time of day. With just the sheer drawn, the room stays bright and airy but the direct sun off the sofa is gone. The owners no longer need to physically walk over and pull a cord across the full width of the room, which was the main daily annoyance before.
Thinking About Something Similar?
Send us your window or door width and a photo of the space. We'll tell you whether a motorized track makes sense for your room, and give you a price before we visit.
Our Successful Projects
Curtains
Lorem ipsum dolor sit amet, consectetur adipiscing elit.
Curtains
Lorem ipsum dolor sit amet, consectetur adipiscing elit.
Curtains
Lorem ipsum dolor sit amet,Â
Curtains
Lorem ipsum dolor sit amet,Â



