How to Hang Prepasted Wallpaper

Do you want to make changes to your space? Hanging prepasted wallpaper can transform any space without much effort. This guide by Wallpaper Land will show you how to hang prepasted wallpaper, whether you have experience or are new to DIY projects. With some tools and work, you can repair your walls. You may make a statement at home after reading this. We are introducing a simple and effective method to hang prepasted wallpaper. Want to learn how to hang prepasted wallpaper? Let’s start.

Tools and Materials Needed

To start with hanging prepasted wallpaper, having the right tools and materials is important. Here’s a list of everything you’ll need

• Choose a design that speaks to your style and complements your space.
• Measure the height and width of your walls to determine how much wallpaper you’ll need.
• You’ll need these for trimming excess paper during installation.
• This is where you’ll activate the adhesive on the back of the wallpaper.
• This tool applies water onto the wallpaper for activation.
• Smooth out any air bubbles or wrinkles as you hang each strip of wallpaper.
• Protect your floors and furniture from drips or spills during installation.
• These will help ensure that each strip is hung straight and aligned properly.
• Depending on the height of your walls, you can need additional support while hanging higher strips.

Steps for Hanging Prepasted Wallpaper 

Preparing the Wall

Start by ensuring that the wall surface is clean and smooth.

Remove any existing wallpaper, dirt, or debris using a scraper or sandpaper.

Fill in any holes or cracks with a spackling compound and let it dry completely.

Activating the Adhesive

Unroll the prepasted wallpaper and gently trim pieces to suit your wall.

Soak each strip in water or sponge the backside to activate the adhesive per the manufacturer’s directions.

Hanging the First Strip

Begin at one corner of your wall and align one edge of the first strip with this starting point.

Smooth out any air bubbles using a wallpaper smoother tool as you gradually apply pressure from top to bottom.

Matching Patterns and Trimming Excess Paper

When hanging subsequent strips, match patterns seamlessly for a professional finish.

Use a sharp utility knife or scissors to trim excess paper along edges, corners, and outlets.

Continuing with Additional Strips

Hang each additional strip following steps 2 through 4 until your entire wall is covered.

Smooth any wrinkles or bubbles using your hands or a roller tool.

Preparing the Wall 

Clear the space. Remove any furniture or fixtures obstructing your workspace before hanging prepasted wallpaper. This will give you ample room to work and ensure a smooth installation process.

• Clear the dust, debris, and oil from the wall. Remove dirt with a mild detergent or sugar soap. Before continuing, rinse and dry thoroughly with clean water.
• Inspect the wall for cracks, holes, or uneven areas. Fill these imperfections with spackle or joint compound using a putty knife. Smooth out the surface and sand it once dry for a seamless finish.
• Measure and mark vertical lines on the wall using a level and pencil at intervals corresponding to the width of your wallpaper strips. These lines will serve as guides during installation.

Activating the Adhesive 

• Start by measuring and cutting the second strip of wallpaper, leaving a few inches of extra length at both ends.
• Carefully place the cut strip in a water tray or use a spray bottle to dampen it with warm water. Be sure not to oversaturate it; you want just enough moisture to activate the adhesive on the back.
• Fold the wet part in half like a book to make it easier. This will help you handle it without losing its stickiness.
• Let it sit for about 5 minutes to fully activate the adhesive.
• While waiting, take this opportunity to clean any excess water from your work area and prepare your tools for hanging.

Hanging the First Strip

• Gently open one half of the strip and line it up with one side of your previous wallpaper to make the patterns match.
• Use a smoothing tool or sponge to remove air bubbles and ensure the wall is smooth. Apply even pressure from the top to the bottom of the wall, making sure to cover all areas that touch the wall.
• Remember to keep a few inches of space at the top and bottom for trimming when you measure your wall.
• Cut your first wallpaper strip using a straightedge and utility knife. Be sure to cut carefully.
• Put the strip in water as instructed so that it is completely covered.
• To make the wallpaper straight up and down, begin at one side of the wall and line up the top edge of the wallpaper strip with a plumb line or level.
• To remove air bubbles, gently smooth the wallpaper from the top to the bottom using a brush or sponge.
• To make the paper smaller, use a knife or scissors to cut off the extra parts on both sides.
• Make sure the wallpaper designs on each strip match, so they look the same.

Matching Patterns and Trimming Excess Paper 

• Before the next wallpaper stripe, ensure the designs match. Make sure each component matches the preceding one without gaps or overlaps.
• Use a sharp utility knife or straight-edge cutter for accurate cuts. Trim extra paper from the wall’s top and bottom for a tidy finish.
• When trimming excess paper along corners or edges, be cautious not to cut too close to avoid visible gaps once everything is in place. Take your time and make small adjustments if needed.
• As you progress with hanging additional strips, note any air bubbles or wrinkles that can appear on the surface of the wallpaper.

Continuing with Additional Strips 

• After successfully hanging the first strip of prepasted wallpaper, it’s time to move on to the next ones.
• Follow the manufacturer’s directions to apply glue to another strip’s back.
• Carefully line up the pattern and edges with the previous strip, ensuring they match perfectly.
• Use a wallpaper brush or smoothing tool to remove air bubbles and creases.
• Trim the ceiling and baseboard paper with a sharp utility knife for a neat finish.
• Always overlap new strips slightly to provide a seamless look.
• Repeat these instructions for each strip to cover your space.

In the End

Putting up wallpaper can make a room look better. It can change the room to be more unique and fashionable. Anyone can do this home improvement project if they plan, prepare, and are patient. If you want to put up wallpaper without problems, you can ask a professional for help or look up tutorials online. They will give you good advice and show you how to do it right. You can make your walls look beautiful by adding the perfect wallpaper!